This allows the deletion of bearers experiencing much less information visitors than the configured threshold value. Bearer inactivity timer is started only when time and volume threshold is configured. This command configures the bearer inactivity timer and the edge value of the site visitors through an APN. The bearer inactivity timer can also be configured to exclude default bearer/primary bearer from monitoring bearer inactivity. This command enables/disables the Rulebase Concatenation function at APN level. This function is used to merge the pay as you go attribute and SN1-Rulebase as a brand new rulebase and then apply the new rulebase to the session.
Multiple GTPP groups configuration is actually supported only for load sharing of classes within an APN and not used for failover. When all CGFs are down in a GTPP group, the requests are archived either in exhausting disk or main reminiscence relying on whether or not streaming is enabled. In case no GTPP group is applied for the stated APN or default APN template, then the default GTPP server group obtainable on the context degree is applicable for accounting of a specific APN. If a GTPP group entry is invalid, this GTPP group shall be ignored and the next valid GTPP group within the APN shall be used. If no valid GTTP group exists, then the default GTPP group in the accounting context specified by the GGSN service will be used. In Release 11.zero and later, in case you have mistakenly configured a GTPP group, you must remove the initially configured group and configure the brand new desired group.
If this option is used, the system’s DHCP parameters must be configured. For those who have any kind of inquiries with regards to wherever and how you can work with valid cc website, it is possible to e mail us at the internet site. Configures the APN to assign an IP address obtained from a DHCP server. Restores the APN ip parameters to the following default settings. Disables DNS server handle choice or S6b authentication on a per-APN degree. When the secondary GTPP group is configured with this command, the GTPP messages may also be mirrored to the secondary servers.
If a session specifies a PDP sort that is not supported by the APN, the system rejects the session with a cause code of 220 . Create Session Response, Create/ Update PDP Context Response/ PBA might be despatched with newest configured MTU measurement PCO worth in APN. If UE is in outbound roaming, then default worth shall be provided in the MTU measurement PCO. Both P-GW and S-GW providers apply PPD configuration independently.
When configured, RADIUS interim updates for this APN won’t be despatched, regardless of what is configured within the context that’s used for RADIUS accounting. Partially ignores the DF bit; fragments and forwards the packet, but in addition returns an ICMP error message to the source of the packet. The variety of ICMP errors sent like that is rate-limited to 1 ICMP error packet per second per session. Use this command to configure AAA performance on the APN stage. The Access Point Name Configuration Mode is used to create and configure APN profiles inside the current system context of an UMTS/LTE service.
The primary fqdn might be tried earlier than making an attempt the secondary fqdn. Configures the primary static fqdn string for the HSGW to select the P-GW. Configures both the first and the secondary FQDN string in the configuration. Use this command to specify the P-CSCF addresses or FQDN server name associated with this APN.
The Session controller stores/updates the APN configuration in the AAA supervisor. During the session setup, the session supervisor fills the CC value acquired in session authenticate request, and sends it to AAA manager. The AAA manager matches this against the regionally stored APN configuration, and selects the specified credit-control-group/prepaid-prohibited configuration for the session. Then the session manager passes this credit-control-group/prepaid-prohibited information acquired from the AAA supervisor to ACS supervisor. This keyword is relevant for any non-overridden cc-profile index.